Model 416  
Model 420  
Model 428  
Model 640  

 


click to enlarge >



SPECIFICATION DATA

Intermittent output 94 hp @ 3600 rpm
Continuous output 64 hp @ 3000 rpm
Peak torque 150 ft/lbs @ 2200 rpm
Fuel and type Gasoline-Multi-port/LPG/NG Mixer Type
Engine configuration 4 Cylinder In-line, OHV
Block Material Cast Iron
Head Material Cast Iron
Bore x Stroke (mm) 98.4 X 91.0
Total Piston isplacement 2769 cc
Compression ratio 9.5:1
Length x width x height (mm) 772.1 x 563 x 673
Dry weight (excluding shipped lose parts) 155 Kg
Catalyst (2007 emissions compliance) Remote mounted

Note: HP and Torque figures shown for 2008 LSI - EPA/CARB certified engine with catalyst.

 

PERFORMANCE CURVES

Continuous Gross Output: This is the output which can be obtained at standard ambient conditions from a basic engine, operating in a continuous duty mode.

Actual power levels may vary depending on OEM calibration and application.

back to top >

ENGINE SPECIFICATIONS

General Physical Data
Cylinders 4 Length 30.9 in / 772.1 mm
Cylinder Arrangement Vertical In-line Width 22.5 in / 563.0 mm
Bore 3.94 in / 98.43 mm Height 26.9 in / 673.0 mm
Stroke 3.64 in / 90.98 mm Weight 337.0 lb / 153.0 kg
Cylinder Displacement 42.24 cu in / 692.3 cc Oil Capacity 4.0 qt / 3.8 L
Total Displacement 169.0 cu in / 2769 cc  
Compression Ratio 9.5:1 Electrical
  Starter Motor 12 V - 1.4Kw
Fuel System Alternator 12.0 V - 55 A w/ built in regulator
Gasoline/multiport and/or LPG/NG mixer type  
Fuel Pressure LPG / NG <5 in Distributor with coil-Non-certified applications
Fuel Pressure-gasoline 3 bar Hall effect dist. w/ coil - Certified applicaitons
Fuel Requirement Unleaded Gasoline Cooling
Fuel Pump Electric Type Thermostat 180°F / 82°C
Electronic Governor ZEEMS III  


back to top >