Model 416  
Model 420  
Model 428  
Model 644  

 


click to enlarge >



SPECIFICATION DATA

Intermittent output 139 HP/3,000 rpm
Continuous output 104 HP/3,000 rpm
Peak torque 246 ft-lbs/2,200 rpm
Fuel and type Gasoline / Multi-port - LPG/NG mixer type
Engine configuration 6 Cylinder in-line, OHV
Block Material / Head Material Cast Iron / Cast Iron
Bore x stroke (mm) 98.4 x 91.0
Total piston displacement 4416 cc
Compression ratio 9.7:1
Length x width x height (mm) 1054 x 586 x 810
Dry weight (excluding shipped lose parts) 193 Kg
Catalyst (2007 emmisions compliance) Remote mounted

Note: HP and Torque figures shown for 2008 LSI - EPA/CARB certified engine with catalyst.

 

PERFORMANCE CURVES

 

Actual power levels may vary depending on OEM calibration and application.

back to top >

ENGINE SPECIFICATIONS

General Physical Data
Cylinders 6 Length 41.5 in / 1054.0 mm
Cylinder Arrangement Vertical in-line Width 23.1 in / 586.0 mm
Bore 3.94 in / 98.43 mm Height 31.9 in / 810.0 mm
Stroke 3.64 in / 90.98 mm Weight 470 lb / 214.0 kg
Cylinder Displacement 42.24 cu in / 692.3 cc Oil Capacity 6.0 qt / 5.7 L
Total Displacement 269.6 cu in / 4416 cc  
Compression Ratio 9.7:1  
  Electrical
Fuel System Starter Motor 12 V - 1.4 Kw
Gasoline Multi-port Alternator 12 V - 55 A w/ built in regulator
LPG / NG Mixer Type  
Fuel Pressure (gasoline) 3 bar DIS Ignition Computer Controlled
Fuel Pressure LPG / NG <5 in Distributor with coil - Non-certified applications
Fuel Requirement unleaded gasoline Hall effect dist. w/ coil - Certified applications
Fuel Pump Electric Cooling
Electronic Governor ZEEMS III Thermostat 180°F / 82 °C


back to top >