|
|
|
|
|
|
Download Specification
PDF >
View
Principal Dimensions (1 MB) >
SPECIFICATION DATA
|
| Intermittent output (SAE Gross
J1349) |
42 HP/3,600 rpm |
| Continuous output (SAE Gross J1349) |
38 HP/3,600 rpm |
| Peak torque (SAE Gross J1349) |
9.7kg-m (70 ft-lb)/2,400 rpm |
| Minimum fuel consumption |
203g/Hp-hr (0.448 lb/HP-hr)/2,400 rpm |
| Fuel and type |
Gasoline, 4-cycle, D.O.H.C |
| Cylinder arrangement |
4 in-line |
| Combustion chamber |
Pentroof shape |
| Bore x stroke |
71.0mm x 80.5mm |
| Total piston displacement |
1,274 cc |
| Compression ratio |
9.5 : 1 |
| Length x width x height (standard model) |
622.7 x 516.6 x 600.4 mm |
| Dry weight (standard model)* |
80kg |
|
|
|
click
to enlarge >
|
Curve 1; Intermittent Gross Output
This is the highest output obtainable at SAE standard ambient
conditions from a basic engine equipped only with the built-in
accessories essential to its operation. These levels may be
only maintained for operating period of short duration.
Applications: Scissorlifts, Aerial Platforms, Scrubber/Sweepers,
Utility Vehicles, Construction Equipment
Curve 2; Continuous Gross Output
This is the output which can be obtained at SAE standard ambient
conditions from a basic engine, operating in a continuous
duty mode.
Applications: Generators, Welders, Water Pumps, Air Compressors,
etc.
|
|
|
back to top >
STANDARD EQUIPMENT
|
| Equipment |
Features |
| Exhaust manifold |
Side outlet |
| Cylinder head gasket |
Carbon graphite |
| EFI |
Electronic Fuel Injection |
| Fuel pump |
Electric type |
| Flywheel |
Flat face |
| Rear plate |
Automotive type |
| Fan pulley (W/P pulley) |
Water pump to crank pulley ratio; 1 : 1.19 |
| Water pump |
Centrifugal type, pump to engine speed; 1.19 :
1 |
| Oil pan |
Pressed steel plate, capacity high 3.5 liter |
| Oil filter |
Replacement paper element type |
| Crankshaft pulley |
Single groove |
| Thermostat |
Wax pellet type, 82° C |
| Distributor |
IC ignition type (Breakerless type) |
| Ignition coil |
For IC ignition |
| Spark plug |
Grade BKR5E-11 (NGK) |
| Alternator |
12V-65A (IC regulator built-in type) |
|
|
*Cooling fan, Air cleaner and Starter moter optional.
back to top >
|
|
OPTIONS
|
| Equipment |
Features |
| Electronic fuel injection |
Includes electronic governor |
| Governor |
Electronic governor
*Governed speed can be changed upon customer request |
| Flywheel & housing |
SAE flywheel for 7.5. o/c clutch & SAE #5
housing |
| Cooling Fan |
Pusher: 320mm dia. x6, 340mm dia. x6
: 360mm dia.
x6
Suction: 360mm dia. x7 |
| Fan Spacer |
45mm |
| Air Cleaner |
Air horn for remote air cleaner |
| Starter Motor |
12V-0.75kw conventional type |
|
|
back to top >
Copyright ©2004 Zenith Power Products
LLC. All Rights Reserved.
|
|
|
