|
|
|
|
|
Download
Specification PDF >
View
Principal Dimensions (1 MB) >
SPECIFICATION DATA |
| Intermittent output (SAE Gross J1349) |
62 HP/3,200 rpm |
| Continuous output (SAE Gross J1349) |
56 HP/3,200 rpm |
| Peak torque (SAE Gross J1349) |
132 ft-lb/1,600 rpm |
| Minimum fuel consumption |
210g/Hp-hr/2,600 rpm |
| Fuel and type |
Gasoline, (LPG & Natural gas) 4-cycle, O.H.V. |
| Cylinder arrangement |
4 in-line |
| Combustion chamber |
Wedge shape |
| Bore x stroke |
92.0mm x 93.0mm |
| Total piston displacement |
2,472 cc |
| Compression ratio |
8.7 : 1 |
| Length x width x height (standard model) |
772.1 x 563 x 673 mm |
| Dry weight (standard model)* |
157kg |
|
|
|
click
to enlarge >
|
Curve 1; Intermittent Gross Output
This is the highest output obtainable at SAE standard ambient
conditions from a basic engine equipped only with the built-in
accessories essential to its operation. These levels may be
only maintained for operating period of short duration.
Applications: Scissorlifts, Aerial Platforms, Scrubber/Sweepers,
Utility Vehicles, Construction Equipment
Curve 2; Continuous Gross Output
This is the output which can be obtained at SAE standard ambient
conditions from a basic engine, operating in a continuous
duty mode.
Applications: Generators, Welders, Water Pumps, Air Compressors,
etc.
|
|
|
back to top >
|
| STANDARD EQUIPMENT |
|
Equipment
|
Features
|
| Exhaust manifold |
Center download outlet type |
| Cylinder head gasket |
Non asbestos |
| Fuel Pump |
Mechanical type |
| Flywheel |
Flat face |
| F/W housing |
Forklift type |
| Cooling fan |
Push; 380mm dia x 6F |
| Fan Pulley (W/P pulley) |
Water pump to crank pulley ratio; 1 : 1.01 |
| Water pump |
Centrifugal type, driven by V belt |
| Oil pan |
Pressed steel plate, capacity high 3.5 liter |
| Oil filter |
Replacement paper element type |
| Thermostat |
Wax pellet type, 76.5° C |
| Distributor |
Ignition coil built in full transistor type
|
| Spark plug |
Grade (NGK) BPR4ES |
| Alternator |
12V - 50A (IC regulator built-in type) |
| Starter motor |
12V - 1.2 kW (reduction type) |
|
|
back to top >
|
| OPTIONS |
| Equipment |
Features |
| Electronic fuel injection |
Includes electronic governor |
| Exhaust manifold |
Upswept |
| Governor |
Pneumatic governor, Electronic governor
*Governed speed can be changed upon customer request |
| Fan Pulley |
Fan to crank pulley ratio; 1:0.92, 1.01, 1.10, 1.25 |
| Exhaust manifold |
Front side upward outlet, Flange type 2 bolts |
| Fan Spacer |
10, 15, 20, 27, 31, 35, 45mm |
| Air Horn |
For remote air cleaner (Dry) |
| Alternator |
12V-35A (IC regulator built-in type) |
| Flywheel |
SAE For 8. o/c clutch |
| F/W Housing |
SAE #4 Housing |
|
|
back to top >
Copyright ©2004 Zenith Power Products
LLC. All Rights Reserved.
|
|
|
